fastautorepairs-web

 

 

Everyone ought to know how to jump start a car because you never know when your car battery will fail. The process of jump starting a car is very easy, but if you do not know how to do it, you are advised to look for a professional who will help you because it can sometimes be risky. The main thing to have is jumper cables  before you are set for jump starting your car. The following procedures are to help you in jump starting your car safely.

 

The location of the battery of your car must be known by you or if you are not that sure, always check the owner's manual of your car. The car providing the jump should be in a perfect position next to yours.  The positioning of the car providing the jump next to your car will help in ensuring that the jumper cables reach your car battery without any problem. The cars should be in a position where the jumpers cable should be able to reach their both batteries.  The hoods of the two cars should remain opened and also the car giving the jump must remain shut off.

 

On end of the jumper cables must be clamped onto the battery of the car providing the jump.  There are two clamps of a jumper cable; one part is ideated red to stand for positive and black to stand for negative.  The connection of the clamps to the post on the batteries should be made according to the colors, that is the black clamp to the black post on the batteries and the red clamp to the red post indicated on the batteries.  Ensure that the clamps do not touch each other which can cause a very risky electrical spark and you have to make sure that the clamps are connected correctly according to the colors in both cars. Know about Palm Beach Jump Starts here!

 

By connecting the black clamp to the engine, the spark produced around the battery will automatically be reduced. After all these procedures, you can now start the engine of the car giving you the jump and leave it to run for about ten minutes to help in the charging the dead battery.  Check whether your car can now start by turning on the engine of your car.

 

 

There is a way you should remove the clamps from both batteries, that is, remove the black clamps and then followed by the red clamp after ensuring that your car engine can start. The last one, you should give your car to a mechanic at http://jandltowing.net/parking-enforcement.php after jump starting it to ensure that there is no additional problem engage in your car.